top of page

CBSE Physics Lab Equipment List for Class 11: Apparatus You Need

Writer: yashnarula7963
yashnarula7963
Nov 2
4 min read

If you are stocking or auditing a Class 11 physics lab, this guide gives you the CBSE physics lab equipment list in one place, grouped by experiment. You will see what to buy, how many sets to plan for, and what to check before you order.

The apparatus below follows the 15 experiments and 12 activities for Class 11 in the NCERT Manual of Secondary Stage Physics Laboratory Kit. Always confirm against the current CBSE circular for your session before ordering.


How the Class 11 physics practical is structured

The practical carries 30 of the 100 marks. Students perform experiments and activities from the prescribed list, and submit a record file and an investigatory project.

Because any student may be asked for any experiment, your lab needs every item listed below, not a selection of them.


Experiments: apparatus table

Experiment

Core apparatus

E1: Vernier callipers

Vernier callipers, small sphere or cylinder, rectangular solid block, beaker, tumbler or calorimeter

E2: Screw gauge

Screw gauge, wire samples, metal sheet, irregular lamina

E3: Spherometer

Spherometer, plane glass plate, watch glass

E4: Beam balance

Beam balance, weight box, two objects, block to hold the balance

E5: Parallelogram law of vectors

Pulleys, 50 g slotted weights with hooks, mirror strip, wooden block, thread

E6: Simple pendulum (L-T and L-T² graphs)

Bob with hook, cotton thread, split rubber cork, laboratory stand, stopwatch, metre scale

E7: Limiting friction

Wooden block with hook, pulley, pan, slotted weights, spirit level

E8: Inclined plane and roller

Inclined plane, steel and aluminium rollers, 250 g spring balance, pulley, weights

E9: Helical spring (T²-m graph)

Helical spring, 20 g slotted weights with hooks, laboratory stand, plane mirror strip with scale, stopwatch

E10: Boyle's law

60 mL syringe with wooden top, wooden blocks, 500 g slotted weights, grease

E11: Viscosity by terminal velocity

Resonance tube as liquid column, steel balls, funnel, measuring cylinder, stopwatch, viscous liquid

E12: Cooling curve

Copper calorimeter with stirrer, thermometer, stopwatch, spirit lamp, tripod stand, wire gauze

E13: Sonometer

Sonometer, brass, stainless steel and nichrome wires, set of tuning forks, 500 g weights, wooden wedge, rubber pad

E14: Speed of sound (resonance tube)

Resonance tube with attachment, pinch clip, tuning forks, rubber pad, thermometer

E15: Specific heat by mixtures

Copper calorimeter with stirrer, plastic beakers, thermometer, spirit lamp, tripod stand, wire gauze, solid and liquid samples


Activities: apparatus table

Activity

Core apparatus

A4: Rolling friction

Wooden block with hook, pulley, pan, slotted weights, spirit level

A7: Energy dissipation in a pendulum

Bob with hook, cotton thread, split rubber cork, laboratory stand, stopwatch

A9: Bimetallic strip

Bimetallic strip, spirit lamp, stand

A10: Heating a liquid in a container

Boiling tube fitted with a glass tube in a rubber cork, spirit lamp, tripod stand

A11: Detergent and surface tension

Capillary tube, beaker, stand

A12: Depression of a loaded metre scale

Metre scale, 100 g slotted weights with hook, clamps, laboratory stand

The remaining activities (A1 to A3, A5, A6 and A8) use mainly everyday material such as paper, graph paper, a metre scale, wax and a curved channel or transparent tube.


Browse the full range on our physics equipment page. For heating work, see heating and cooling instruments.


Common items people forget

  • Stopwatches and thermometers: you need more of these than any other item.

  • Laboratory stands, clamps and boss heads: almost every experiment uses them.

  • Spirit lamps, tripod stands and wire gauze for the heat experiments.

  • Slotted weight sets, weight boxes and pans.

  • Measuring cylinders, spirit levels, thread and rubber pads for tuning forks.

  • A shelf of laboratory instruments for balances and general measuring items.


How many sets should you buy?

Plan around batch size, not class size. Practicals are usually run in groups of two to four students per set, so a batch of 30 needs several sets of the common items, such as vernier callipers, screw gauges and pendulum stands. Bulkier items, such as a sonometer or resonance tube, can be shared more widely, since only a few students attempt them at a time.


What to check before you order

  • Least count printed clearly on vernier callipers and screw gauges.

  • Smooth, rust-free pulleys and a stable base on stands.

  • Calibrated tuning forks with the frequency stamped on them.

  • Glassware free of chips. For replacements, see laboratory glassware.

  • Written specifications and a quotation, so you can compare suppliers fairly.


Storage, safety and record-keeping

A good equipment list is only useful if the lab can find things. Label each shelf by experiment, keep small parts such as bobs, clamps and tuning forks in lidded trays, and keep a stock register that the lab in-charge signs each term.

Store screw gauges, vernier callipers and spherometers in their boxes, away from damp. Keep weights in their holders and handle them with forceps. A short breakage and replacement log makes next year's purchase order far easier to write.


Frequently asked questions

Does every Class 11 student perform every experiment?

Students are expected to perform the prescribed experiments and activities during the year. The exam assigns a limited number from that list, so the lab should be ready for any of them.

Can one lab serve Classes 11 and 12?

Yes. Many items, such as stands, weights, balances and thermometers, are shared. Class 12 adds electricity and optics apparatus.

Is a separate physics lab required?

CBSE affiliation norms set lab requirements for senior secondary schools. Check the current affiliation bye-laws for room size and equipment.

How often should apparatus be replaced?

Measuring instruments last for years with care. Glassware, springs, thermometers and consumables wear out faster. Audit the lab at the start of each session.

Do you supply to government schools?

Yes. Alcon Scientific Instruments is registered on GeM, and is also NSIC and MSME registered.


Get a quotation for your physics lab

Alcon Scientific Instruments has manufactured laboratory and educational equipment in Ambala Cantt, Haryana since 1988, is ISO 13485:2016 certified, and exports to 40+ countries. Send us your list through our contact page, or email info@alconexports.com or call +91-9034444833. See also our full product range.

 
 
 

Comments


bottom of page